服务热线
18051415558
该机夹头采用变频控制,槽筒采用伺服控制。卷绕比采用电子卷绕比,可以获得高品质卷装。摩擦辊接触压力采用伺服比例阀 控制,根据不同的纱线可以任意调节。
18051415558
该机夹头采用变频控制,槽筒采用伺服控制。卷绕比采用电子卷绕比,可以获得高品质卷装。摩擦辊接触压力采用伺服比例阀 控制,根据不同的纱线可以任意调节。卷绕张力控制是采用比例阀加无摩擦气缸组合,根据纱线卷装的需求可以任意设定需要 的卷绕张力。卷绕动程为双动程供用户选择。适合芳纶,聚芳酯,聚酰亚胺,超高分 子量聚乙烯,PBO 等高性能纤维卷绕及倒筒。
This winder chuck motor controlled by inverter.Trvers cam controlled by servo control system .Winding proportion by electronic.so high-quality package are available.Friction roller contact pressure using servo proportional valve control.depending on the yarn it can be adjusted at will.Winding stress control is a combination of proportional valve and frictionless cylinders.Depending on the needs of the yarn,the required winding stress can be set at will.The same machine can be available in two width of bobbin.Equipped with a broken yarn alarm and automatic suction device.this machine is suitable for aramid fiber ,PBO fiber.
型号 Model | SW320SG/300/600 |
---|---|
控制方式 Control model | 变频+伺服 Inverter+Servo system |
框架Takeup Frame | 单层 one layer |
卷绕纤度 Diner(Dtex) | 150-15000Dtex |
工艺速度 Winding Speed(m/min) | 100-500m/min |
卷绕比控制winding ratio | 电子控制Electronic |
丝饼宽度bobbin width(mm) | 190/250/300mm |
卷装直(Max.)bobbin dia.(mm) | 280mm |
纸管内径 Inner diameter of tupe(mm) | 75/94mm |
纸管长度length of tube(mm) | 220/290/320mm |
备注:以上规格参数如有变更,恕不另行通知。 |
设备工程参数 | |||
---|---|---|---|
![]() | 电压要求 | 380V ± 5% 3相,4线 | |
装机功率 | 1250W | ||
气源要求 (仪表压缩空气) | 压 力: 0.5 ~ 0.6MPa 露 点: -20℃ 条 件: 无油无固体杂质 | ||
设备能耗 | 耗气量: 0.01M3/h 耗电量: 0.7KW/h | ||
设备重量 | 410KG(净重) | ||
备注:以上规格参数如有变更,恕不另行通知。 |