走进安道 产品中心 产品运行视频 新闻动态 联系我们
SWA360SG 单头带导盘全自动卷绕机

SWA360SG 单头带导盘全自动卷绕机

该机夹头采用变频控制,槽筒采用伺服控制。卷绕比采用电子卷绕比,可以获得高品质卷装。摩擦辊接触压力采用伺服比例阀控制,根据不同的纱线可以任意调节。

  • 厂家:安道机械
  • 分类:卷绕机
  • 发布:2023-07-25
  • 浏览:
咨询热线

18051415558

联系我们
产品介绍

该机夹头采用变频控制,槽筒采用伺服控制。卷绕比采用电子卷绕比,可以获得高品质卷装。摩擦辊接触压力采用伺服比例阀控制,根据不同的纱线可以任意调节。卷绕张力控制是采用比例阀加无摩擦气缸组合,根据纱线卷装的需求可以任意设定需要的卷绕张力。卷绕动程为双动程供用户选择。同时配备断纱报警, 自动吸丝装置。适合卷绕芳纶,聚芳酯,聚酰亚胺,超高分 子量聚乙烯,PBO 等高性能纤维。

This winder chuck motor controlled by inverter.Trvers cam controlled by servo control system .Winding    proportion by electronic.so high-quality package are available.Friction roller contact pressure using servo   proportional valve control.depending on the yarn it can be adjusted at will.Winding stress control is a     combination of proportional valve and frictionless cylinders.Depending on the needs of the yarn,the required winding stress can be set at will.The same machine can be available in two width of bobbin.Equipped with a  broken yarn alarm and automatic suction device.this machine is suitable for aramid fiber ,PBO fiber.


产品参数
型号 ModelSWA360SG/300/600SWA360SG/300/1200
控制方式  Control model变频+伺服 Inverter+Servo system变频+伺服 Inverter+Servo system
框架 Takeup Frame单层 one layer单层 one layer
换筒方式 change model自动换筒 Automatic change自动换筒 Automatic change
卷绕纤度 Diner(Dtex)150-15000Dtex150-15000Dtex
工艺速度 Winding Speed(m/min)100-500m/min100-1000m/min
卷绕比控制 winding ratio电子控制 Electronic电子控制 Electronic
丝饼宽度 bobbin width(mm)190/250/300mm300/320mm
卷装直径 bobbin dia.(mm)280mm280mm
纸管内径(可选择)Inner diameter of tupe(mm)75/94mm75/94mm
纸管长度 length of tube(mm)220/290/300/320mm300/320mm
备注:以上规格参数如有变更,恕不另行通知。

设备工程参数
图片3c.png电压要求380V ± 5%  3相,4线
装机功率2000W
气源要求
(仪表压缩空气)
压 力: 0.5 ~ 0.6MPa
露 点: -20℃
条 件: 无油无固体杂质
设备能耗
耗气量: 0.01M3/h
耗电量: 0.75KW/h
设备重量520KG(净重)
备注:以上规格参数如有变更,恕不另行通知。